Zoeller Company 63-0001
ZOELLER SUBM M63 AUTO CI PUMP
SKU
735340
Zoeller® Submersible Pump, Automatic, Series: M63, 43 gpm, 1-1/2 in NPT Outlet, 19-1/4 ft Maximum Head, 115 VAC, 9.7 A, 1 ph ph, 130 deg F, 1/3 hp, Non-Clogging Vortex Impeller, Polypropylene Float, 3-Wire Cord, Sleeve Bearing, 1/2 in Maximum Diameter of Solids, Cast Iron, Green, Powder Epoxy Coated, 10-3/32 in W x 10-1/16 in H Dimensions, Domestic
- Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology
- Corrosion resistant, powder coated epoxy
- FKM outer switch boot
- No sheet metal parts to rust or corrode
- Stainless steel screws, switch arm, guard and handle
- No screens to clog
- Watertight neoprene square ring between motor and pump housing
- Oil filled, hermetically-sealed, automatic reset thermal overload protected motor
- Upper and lower sleeve bearings running in bath of oil
- Entire unit pressure-tested after assembly
- Carbon and ceramic shaft seal
- Maximum temperature for effluent or dewatering 130 deg F
- Passes 1/2 in (12 mm) spherical solids
- Watertight and dust-tight
- Permanently oiled bearings
- Cast iron impeller
- Solid, buoyant, polypropylene float
- Oil filled cooling
- Auto reset thermal overload motor protection
- Stainless steel hardware and neoprene gasket
| Material | Cast Iron |
|---|---|
| Cord Type | 3-Wire |
| Temperature Rating | 130 deg F |
| Maximum Diameter of Solids | 1/2 in |
| Color | Green |
| Finish | Powder Epoxy Coated |
| Impeller Type | Non-Clogging Vortex |
| Bearing Type | Sleeve |
| Domestic/Import | Domestic |
| Series | M63 |
| Outlet Size | 1-1/2 in NPT |
| Voltage Rating | 115 VAC |
| Flow Rate | 43 gpm |
| Maximum Head | 19-1/4 ft |
| Dimensions | 10-3/32 in W x 10-1/16 in H |
| Phase | 1 ph |
| Amperage Rating | 9.7 A |
| Horsepower | 1/3 hp |
| Type | Automatic |
| Brand | Zoeller |
