Field Controls SWG-6

Field Controls Power Venter, Series: SWG, 115 VAC, 2.1 A, 228 W, 6 in, 3100 rpm, 12-1/4 in H x 12 in W

• The SWG or ComboVent™ power venter is the safest, most efficient power venter available today
• Patented SWG or ComboVent power venters are ETL and cETL listed for all LP gas, natural gas or oil-fired heating equipment
• The SWG or ComboVent combines the motor, blower and vent hood in one complete, easy to install unit
• The SWG mounts on the outside of the building and pulls the combustion gases from the appliance through the outside wall utilizing 100% negative pressure
• 100% negative pressure in the vent pipe for maximum safety
• Standard galvanized pipe can be used instead of expensive stainless steel
• No need to seal vent pipe joints, saving time and money
• Significantly longer vent lengths than positive pressure, direct vent systems
• The SWG or ComboVent is recommended by major heating appliance manufacturers
• The SWG or ComboVent must be sized to match the appliance or appliances input firing rate
• Most firing rates are published in the manufacturer's installation manual
• The SWG and ComboVent must be installed with a CK control kit to ensure proper listing and safe, efficient venting
• Thermal protection
• 2.65 gph maximum oil at 100 psi
• 2.25 gph maximum oil at 140 psi
• 68 Btu/hr at maximum equivalent feet of vent pipe
• 100 Btu/hr at 60% of maximum equivalent feet of vent pipe
• 60 Hz frequency
• 416000 Btu/hr gas input