Zoeller Company 98-0001
1/2 HP CI SUBMERSIBLE PUMP
SKU
145137
Zoeller® Effluent/Dewatering Submersible Pump, Automatic, Series: Flow-Mate M98, 73 gpm, 1-1/2 in Outlet, 23 ft Maximum Head, 1/2 hp, 115/230 VAC, 9.4 A, 60 Hz, 1 ph, 1725 rpm Motor, Non-Clogging Vortex Impeller, 130 deg F, Oil Fed Bearing, Cast Iron, 12-1/16 in H x 10-1/8 in W
- Float operated 2-pole mechanical switch
- Corrosion-resistant, powder coated epoxy finish
- No sheet metal parts to rust or corrode
- Stainless steel screws, guard, handle, arm and seal assembly
- No screens to clog, all castings are cast iron class 25 to 30 25000 tensile strength, watertight, neoprene square ring between motor and pump housing
- Permanent split capacitor motor, oil filled and hermetically-sealed, automatic reset thermal overload protection
- Watertight neoprene square ring between motor and pump housing
- Cast iron switch case, motor, pump housing and base, bearings, upper and lower oil fed cast iron, carbon and ceramic shaft seal
- Entire unit pressure-tested after assembly
- Class B insulation, 9-1/2 in/3 in auto On/Off points
- 1/2 in spherical solid handling, 15 ft cord, oil filled cooling
- Auto reset thermal overload motor protection
- Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
- AISI 1215 cold roll steel motor shaft
- 1-1/2 in NPT discharge
| Material | Cast Iron |
|---|---|
| Frequency Rating | 60 Hz |
| Temperature Rating | 130 deg F |
| Impeller Type | Non-Clogging Vortex |
| Bearing Type | Oil Fed |
| Series | Flow-Mate M98 |
| Outlet Size | 1-1/2 in |
| Voltage Rating | 115/230 VAC |
| Flow Rate | 73 gpm |
| Maximum Head | 23 ft |
| Motor Speed | 1725 rpm |
| Dimensions | 12-1/16 in H x 10-1/8 in W |
| Phase | 1 ph |
| Amperage Rating | 9.4 A |
| Horsepower | 1/2 hp |
| Type | Automatic |
| Brand | Zoeller |
