Eemax AP144480

Eemax™ Electric Tankless Water Heater, Series: SpecAdvantage™, 491348 Btu/hr Heating, 480 VAC, 173 A, 144000 W, 3 ph, 40 gpm, 1-1/4 in MNPT Water Connection, Nickel Chrome Heating Element, Energy Factor: 0.99, 3/0 AWG Wire, Wall Mount, 20 gpm at 49 deg F Rise Recovery, 25 to 150 psi, 60 to 140 deg F, ASME Yes/No: No, Slate Gray, 26.2 in W x 10.3 in D x 17.7 in H, Commercial Commercial/Residential/Dual, Domestic

• On demand hot water - No delay
• Cut energy waste - flow switch activates heater only when water is running, no standby heat loss
• Endless hot water - no storage capacity to deplete
• Reduces installation cost and material - No temperature and pressure valve required
• Thermo optical sensor and predictive control algorithm ensures optimal heat management
• Easy installation - simple NPT fittings that require no soldering, unit mounts directly to the wall with common hardware
• Prevents legionella bacteria growth
• Reduces calcification and sedimentation
• Custom designs up to 80 gpm
• 2.5 gpm turn-on
• Replaceable cartridge bare wire element
• Bottom plumbing configuration
• Pre-heated or cold water Inlet
• Highly visible LCD display and control with built in diagnostics
• Adjustable thermostat
• The wetted surface of this product contacted by water contains less than 0.25% lead and meets ANSI/NSF 372