Appleton 8375N
4IN SQ CVR TOGGLE/DUPLEX RECPT
SKU
800823
Appleton® ETP™ Square Box Cover, Raised, 2 Gangs, 4 in Length, 4 in Width, 1/2 in Depth, Squared, Duplex Receptacle/Toggle Switch Cover, Surface Mount, 7 cu-in, Steel, Galvanized
- Boxes with concentric or eccentric knockouts are suitable for bonding without any additional bonding means where used in circuits above or below 250 VAC
- Unless otherwise noted all concentric or eccentric knockouts are 1/2 to 3/4 in combinations
- Single and double gang metallic outlet and switch boxes are acceptable for use in two hr fire rated walls
- Groundskeeper raised ground feature on boss inside box provides one or two #10-32 tapped hole, allowing a 3/8 in long green ground screw to be threaded into box without contacting mounting surface
- Other boxes provided with flat ground tapped hole, except plenum boxes
- 1/2 in raise for one toggle switch and one duplex receptacle
- Extra mounting screws and nuts provided
| Type | Raised |
|---|---|
| Point Size | #2 |
| Insulated | Yes |
| Measurement System | Imperial |
| Capacity | 7 cu-in |
| Mounting Type | Surface |
| Depth | 1/2 in |
| Finish/Coating | Black Oxide |
| Handle Type | Ergonomic/Tri-Lobe |
| Shank Length | 3.94 in |
| Point Type | Phillips® |
| Length | 4 in |
| Body Diameter | 1.278 in |
| Number of Gangs | 2 |
| Width | 4 in |
| Overall Length | 7.95 in |
| Finish | Galvanized |
| Material | Steel |
| Color | Black/Red |
| Cover Type | Duplex Receptacle/Toggle Switch |
| Shape | Squared |
| Brand | Appleton Grp |
