RIDGID® Pipe Tap, Measurement System: Imperial, 3/8-18 Thread, NPT Thread Standard, Tapered Chamfer, 1-1/16 in Thread Length, 2-9/16 in Overall Length, 4 Flutes, Right Hand Cutting Direction, 0.531 in Shank Diameter, 9/16 in Tap Drill, High Carbon Steel, Oxide
- These taps are especially suited for restricted area work
- All taps have taper of 3/4 in-ft
- Marked with drill size for pilot hole
| Overall Length | 2-9/16 in |
|---|---|
| Number of Flutes | 4 |
| Shank Diameter | 0.531 in |
| Chamfer Type | Tapered |
| Thread Standard | NPT |
| Thread Size | 3/8-18 |
| Chamfer Type | Tapered |
| Chamfer Type | Tapered |
| Finish/Coating | Oxide |
| Thread Standard | NPT |
| Chamfer Type | Tapered |
| Chamfer Type | Tapered |
| Thread Standard | NPT |
| Thread Length | 1-1/16 in |
| Cutting Direction | Right Hand |
| Chamfer Type | Tapered |
| Measurement System | Imperial |
| Tap Drill Size | 9/16 in |
| Material | High Carbon Steel |
| Brand | Ridgid Tool |
