RIDGID® Pipe Tap, Measurement System: Imperial, 1-11-1/2 Thread, NPT Thread Standard, Tapered Chamfer, 1-3/4 in Thread Length, 3-3/4 in Overall Length, 4 Flutes, Right Hand Cutting Direction, 0.843 in Shank Diameter, 1-9/64 in Tap Drill, High Carbon Steel, Oxide
- These taps are especially suited for restricted area work
- All taps have taper of 3/4 in-ft
- Marked with drill size for pilot hole
| Overall Length | 3-3/4 in |
|---|---|
| Number of Flutes | 4 |
| Shank Diameter | 0.843 in |
| Chamfer Type | Tapered |
| Thread Standard | NPT |
| Thread Size | 1-11-1/2 |
| Chamfer Type | Tapered |
| Chamfer Type | Tapered |
| Finish/Coating | Oxide |
| Thread Standard | NPT |
| Chamfer Type | Tapered |
| Chamfer Type | Tapered |
| Thread Standard | NPT |
| Thread Length | 1-3/4 in |
| Cutting Direction | Right Hand |
| Chamfer Type | Tapered |
| Measurement System | Imperial |
| Tap Drill Size | 1-9/64 in |
| Material | High Carbon Steel |
| Brand | Ridgid Tool |
