NSI ITG-6
6-14AWG GREY INS TAP CON
SKU
723263
NSI Polaris™ Multi-Tap Connector, Insulated, Series: ITG, Copper Conductor, 14 to 6 AWG (Class B, C, D)/14 to 6 AWG (Class K, M, I) Conductor, 600 VAC, 1 Pole, 2 Conductor, B, C, D, K, M, I Wire Type, 1/8 in Hex, -45 to 90 deg C, Plastisol, Gray, 1.13 in L x 1.24 in W x 1.37 in H
- Insulated with dielectric strength plastisol for tough mechanical protection
- Supplied with removable access plugs over the hex screws to protect against contamination
- Eliminates the need for cover and taping
- Will not support combustion
- Reusable
- Factory applied insulation provides consistent quality and protection
- Suitable for connecting two wires and designed for use with fine stranded flexible copper conductors
- One-Side Wire Entry, Form secure connections between 2 conductors quickly using the single-side entry ports sized for wires between 6 and 14 AWG
- Fine-Stranded Wires, Specially designed to splice fine-stranded, flexible and extra-flexible copper conductors, including DLO cable and motor lead wires
- Ergonomic Design, Rounded corners and a smooth exterior finish over the plastisol insulation make Polaris connectors comfortable to grip
- Removable Plugs, Each port and adjustable set screw is covered by a secure plug to prevent debris, moisture or contaminants from entering the insulated connector
- Pre-filled Oxide Inhibitor, Both single-side entry ports come pre-filled with an oxide inhibitor gel to prevent corrosion and provide low-contact resistance
| Temperature Rating | -45 to 90 deg C |
|---|---|
| Dimensions | 1.13 in L x 1.24 in W x 1.37 in H |
| Specifications | 1 Pole, 2 Conductor, B, C, D, K, M, I Wire Type, 1/8 in Hex |
| Conductor Size | 14 to 6 AWG (Class B, C, D)/14 to 6 AWG (Class K, M, I) |
| Voltage Rating | 600 VAC |
| Conductor Type | Copper |
| Series | ITG |
| Material | Plastisol |
| Type | Insulated |
| Finish | Gray |
| Brand | NSI Ind |
