WattStopper DW100I

WattStopper®, DW100I, Wall Switch Occupancy Sensor, Dual Technology Single Relay, Series: DW Series, 120/230/277 VAC, 0 to 1200 W, 1/6 hp Power, Passive Infrared/Ultrasonic Sensor, 525 sq-ft Coverage, 180 deg Viewing, 5 to 30 min Time Delay, Fluorescent/Incandescent/LED Lamp, 50/60 Hz Response, Flying Lead Connection, Automatic On/Off, Manual On/Off Control Output, Surface Mounting, 35 deg C, Plastic, Ivory, 2.73 in L x 1.76 in W x 1.83 in H Dimensions

• Time delay adjustments - 5 to 30 min at minimum, 3 minimum if no activity after 30 s at walk through mode, 5 s for 10 min with dip switch setting at test mode
• High or low (dip switch) PIR adjustment and minimum to maximum (trimpot), OFF ultrasonic adjustment
• 0 to 800 W tungsten or ballast, 1/6 hp motor load limit for each relay at 120 VAC and 0 to 1200 W ballast load limit for each relay at 277 VAC
• Complies with 2011 NEC requirements
• Detection signature analysis eliminates false triggers and provides immunity to RFI and EMI
• Zero crossing for long relay life
• Vandal-resistant lens combines precise coverage with durability
• Choice of manual on or auto-ON operation
• Selectable walk through mode turns lights off 3 min after the room is initially occupied if no motion is detected after the first 30 s
• Test mode allows quick and easy adjustments
• Selectable audible alert for impending shutoff
• In automatic mode, sensor returns automatically to auto-ON after lights are turned OFF manually, ideal for presentations
• Four occupancy logic options give users the ability to customize control to meet application needs
• Optional light level sensing with simple setup
• Service mode allows sensor to operate as a service switch in the unlikely event of a failure
• Sensor coverage tested to NEMA guide publication WD 7-2000
• Compatible with decorator wallplates
• One relay and one on/OFF button
• Magnetic or electronic ballast load type
• Can turn lights off/on based on occupancy