MORSE 92520
1/2"PEX X 1/2"M NPT 90 ZL
SKU
532317
MORSE® Spiral Point Tap, General Purpose, Series: 559D, Measurement System: Imperial, Ground/UNF, #0-80, Plug Chamfer, 2 Flutes, HSS, TiN Coated, Right Hand Cutting, 5/16 in Thread Length, 1-5/8 in Overall Length, H2 Thread Limit
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- TiN titanium nitride is an excellent coating for machining a wide variety of materials at greatly increased speeds and feeds
- Increases tool surface hardness, lubricity and heat resistance and resists chip welding
| Material | HSS |
|---|---|
| Fitting/Connector Type | 90 deg Elbow |
| Temperature Rating | 180 deg F |
| Thread Size | #0-80 |
| Cutting Direction | Right Hand |
| Finish/Coating | TiN Coated |
| Measurement System | Imperial |
| Finish/Coating | TiN Coated |
| Thread Length | 5/16 in |
| Cutting Direction | Right Hand |
| Thread Size | #0-80 |
| Chamfer Type | Plug |
| Overall Length | 1-5/8 in |
| Number of Flutes | 2 |
| Measurement System | Imperial |
| Thread Standard | Ground/UNF |
| Thread Length | 5/16 in |
| Thread Limit | H2 |
| Thread Standard | Ground/UNF |
| End Style | PEX Press x MNPT |
| Domestic/Import | Import |
| Nominal Size | 1/2 in |
| Type | General Purpose |
| Pressure Rating | 160 psi |
| Series | 2070G |
| Brand | Viega |
| Fitting Type | Elbows |
| Size | 1/2" |
| Material | Brass |
