Juno TC926R

Juno® TC Remodel Housing, Sloped Standard, 120 VAC, 6-1/2 x 6-7/8 in Ceiling Opening, Incandescent Lamp, 150 W Lamp, 1 Lamps, Non-IC Insulation, Ceiling Mount, For Use With: Ceiling Downlighting, 6 in Dia, 6-7/8 in Width, Galvanized Steel Housing

• Oblique angle housing design holds trim flush with the ceiling
• Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range
• Medium base porcelain socket with nickel plated copper screw shell, thermally protected against improper use of lamp
• Housing is vertically adjustable to accommodate up to a 1 in ceiling thickness
• A19/MR16/BR30/R30/PAR30/PAR30L/PAR38 lamps
• Housing is secured in place with factory supplied remodel clips
• Shadow-free, knife edge trim design blends smoothly into the ceiling
• Angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics
• Maximum (4) 12 AWG 90 deg C branch circuit conductors
• Telescoping height for use in 2 x 8 or 2 x 10 in construction
• The housing is designed to be installed in non-insulated areas or where insulation is spaced at least 3 in from the housing
• The non-IC remodel housing for use in 2/12- to 6/12-pitch slopes, 9- to 27 deg , is ideal for applications where the backside of the ceiling is not accessible
• Slope ceiling TC Remodel Housing for remodel application where back side of ceiling is not accessible
• Standard 120 V used in most residential applications
• Design for use in non-insulated areas
• Emergency battery back-up not included in this version