Nora Lighting NSR-404QAT

Nora Lighting® Remodel Housing, Airtight, 120 VAC, 50 W Lamp, 1 Lamps, Non-Insulated Insulation, Ceiling Mount, For Use With: Line Voltage Lamp, 5-5/8 in Height, 4-1/4 in Width, 11-1/4 in Depth, Aluminum Housing, White

• Remodel four inch housing for installation into existing sheet rock ceilings where access is only available from below the ceiling
• 0.050 white baked enamel one piece drawn aluminum housing adjusts to a ceiling thickness from 3/8 to 1-3/8 in
• Non-IC housings require a minimum clearance of 3 in from thermal insulation and 1/2 in from adjacent building components
• Airtight (AT) housings have factory installed gaskets to restrict airflow from room into ceiling plenum to <2 cfm
• Galvanized steel socket plate adjusts inside housing for optimum light performance
• Four high tension tempered steel springs secure remodel housing to ceiling
• Prewired 15 cubic inch 0.060 in thick galvanized steel, with (6) 1/2 in knock outs four Romex® pryouts, and snap-on cover
• Standard flex whip carries wire lead from junction box into housing
• Wire leads extend from housing and thermal device to medium base socket
• Galvanized steel socket plate adjusts inside housing for optimum light performance
• Two 13-3/4 to 24-1/2 in adjustable bar hangers with captive nails are included on frame
• Prewired 25 cubic inch 0.064 in thick galvanized steel, with (7) 1/2 in, two 3/4 in knock outs four Romex® pryouts, and snap-on covers
• Housing contains three UL approved quick connections that allow insertion of 1/4 in stripped solid or tinned standard conductors to be inserted into the connector