WATTS 0548006
1/2" CARBON STEEL C-FBV-1 FP
SKU
891850
WATTS® Ball Valve, 2-Piece, 1-1/2 in Nominal, FNPT End Style, 1000 psi WOG Pressure, 0 to 400 deg F, Full Port, 1-1/4 in Orifice, Latch Lock Handle Actuator, 304 Stainless Steel Ball, 4-3/8 in Inlet to Outlet Length, 3-5/16 in Top to Inlet Center, Carbon Steel Body, 304 Stainless Steel Stem and PTFE Seat Trim, Import
- Two-piece carbon steel body construction
- Drilled and tapped mounting pads
- Vinyl insulated standard Latch-Lok handle to lock open or closed
- Adjustable packing gland
- Full port for minimal pressure drop
- Reinforced PTFE seats and seals
- Bottom loaded Blow-out proof stem
- PTFE stem packing, thrust washer and body seal
- Vinyl insulator on heavy duty 304SS handles
- Low operating torque
- Each valve factory tested
- 125 psi working steam pressure
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
| Port Type | Full |
|---|---|
| End Style | FNPT |
| Ball Material | 304 Stainless Steel |
| Domestic/Import | Import |
| Inlet to Outlet Length | 4-3/8 in |
| Top to Inlet Center | 3-5/16 in |
| Type | 2-Piece |
| Pressure Rating | 1000 psi WOG |
| Orifice Size | 1-1/4 in |
| Body Material | Carbon Steel |
| Nominal Size | 1-1/2 in |
| Temperature Rating | 0 to 400 deg F |
| Series | C-FBV-1 |
| Actuator Type | Latch Lock Handle |
| Trim Material | 304 Stainless Steel Stem and PTFE Seat |
| Brand | Watts |
| Type | Ball Valve |
| Size | 1/2" |
