Zoeller 267-0032
ZOELLER WASTE MATE PIGGY BACK
SKU
271576
Zoeller® Submersible Pump, Series: Waste-Mate 260, 128 gpm, 2 or 3 in NPT Outlet, 21-1/2 ft Maximum Head, 1/2 hp, 115 VAC, 10.4 A, 60 Hz Frequency, 1 ph ph, 1750 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 14-5/16 in H Dimensions
- Float operated 2-pole mechanical switch
- Durable cast construction, ASTM Class 25 cast iron switch case and pump housing
- Non-clogging vortex impeller design, engineered plastic impeller with metal inserts (1 ph)
- Not affected by materials normally found in drainage and sewage pumps
- Stainless steel screws, bolts, handle, guard, arm and seal assembly
- Neoprene square ring and gasket
- Oil filled, hermetically sealed motors
- Oil-lubricated bearings
- Carbon and ceramic shaft seal
- Corrosion-resistant, powder coated epoxy finish
- Completely submersible
- Watertight and dust-tight
- Automatic reset thermal overload protection (1 ph only)
- 12 in on point, 4 in off point
- High water alarms available
- 10 in auto/15 in non auto, 3-wire neoprene cord and plug
- Cap/motor housing/pump housing cast iron, base cast iron or engineered plastic
- Upper and lower sleeve bearing
- Engineered plastic with metal insert impeller, Stainless steel hardware, AISI 1215 cold rolled steel motor shaft, Neoprene gasket
- Submersible sewage/effluent or dewatering pump
| Outlet Size | 2 or 3 in NPT |
|---|---|
| Series | Waste-Mate 260 |
| Horsepower | 1/2 hp |
| Flow Rate | 128 gpm |
| Motor Speed | 1750 rpm |
| Frequency Rating | 60 Hz |
| Amperage Rating | 10.4 A |
| Material | Cast Iron |
| Phase | 1 ph |
| Voltage Rating | 115 VAC |
| Bearing Type | Sleeve |
| Maximum Head | 21-1/2 ft |
| Impeller Type | Non-Clogging Vortex |
| Temperature Rating | 130 deg F |
| Dimensions | 14-5/16 in H |
| Cord Type | 3-Wire Neoprene |
| Brand | Zoeller |
